 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| X-Valve(R) 8 mm switching soleniod valves FEATURES * 3-way, 2 position valve (NO, NC & Distributor) * Compact size, only 8 mm in width * Meets pressure requirements including 6, 30 & 100 psi * Excellent leakage specification for over 25 million cycles * Ensures high reliability with its single piece body design * Barbed pressure ports allow for direct tubing or manifold assemblies * Non-elastomeric versions with enhanced media compatibility available on request MEDIA COMPATIBILITY Non-reactive gases and selected liquids PHYSICAL PROPERTIES Operating environment X5... all other Storage temperature 15 to 50 C 0 to 50 C -40 to 70 C 24 mm (0.92 in) 7.9 mm (0.31 in) 9.5 mm (0.375 in) 8 mm (centerline) Universal barbs for 1/16 in I.D. tubing (1/32 in wall max.); manifold mount with X-seal 4.5 g (0.16 oz) 0.074 cm3 (0.0045 in3) WETTED MATERIALS PBT (polybutylene terephthalate); 430 series stainless steel; 302 series stainless steel (passivated); FKM (fluoroelastomer); EPDM (ethylene propylene diene monomer); silicone Length Width Height ELECTRICAL Spacing Power X1... (6 psi) all other (30 psi, 100 psi) Voltage Electrical connections 0.5 W 1.0 W 3, 5, 12, 24 VDC PC pins, 4 mm centers Internal volume Porting Weight X-Valve is a registered trademark of Parker Hannifin Corporation. October 2008 / 250 1/4 www.sensortechnics.com X-Valve(R) 8 mm switching soleniod valves PERFORMANCE CHARACTERISTICS Part no. X1... X2... X5... Pressure 0...6 psig 0...30 psig 0...100 psig Minimum flow 4 lpm @ 6 psi 6 lpm @ 30 psi 9 lpm @ 100 psi Orifice siz es/ Equivalent CV1 0.045" (1.143 mm)/ 0.018 CV 0.030" (0.762 mm)/ 0.010 CV 0.020" (0.510 mm)/ 0.005 CV Leak rate2 0.16 sccm (FKM, EPDM), 0.016 sccm (silicone) R esp o n se 0.16 sccm 0.2 sccm <20 ms cycling FLOW CURVES (typical air flow)3 Notes: 1 The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a valve. If several valves with the same nominal diameter are compared, the valve with the highest CV value has the best flow dynamics design. The equivalent european measure is the kV value expressed in m3/h (kV = 0.86 CV). 2 sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1000 sccm = 1 slpm. 3 slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1 slpm = 1000 sccm. October 2008 / 250 2/4 www.sensortechnics.com X-Valve(R) 8 mm switching soleniod valves OUTLINE DRAWING Side view 0.41 (10.3) Long pin 0.375 (9.5) 0.28 (7.1) Short pin Normally closed port Common port 3 x barb fitting for 1/16" I.D. thin wall polyurethane tubing Normally open port dimensions in inches (mm) Bottom view 0.916 (23.3) 0.640 (16.3) 0.150 (3.8) 0.100 to receptacle center line (2.5) 0.310 (7.9) 0.157 (4.0) 0.155 (3.9) receptacle contacts for 0.025 (0.6) SQ. terminal posts dimensions in inches (mm) Manifold mount diagram 0.315 (8.0) 0.157 (4.0) O 0.047 x 0.200.02 (O1.2 x 5.10.5) #0-80 UNF-2B x 0.150.02 ( 3.80.5) 0.030 (0.8) 0.642 (16.3) 0.5345 (13.58) 0.6746 (17.13) 0.315 (8.0) O 0.090 x "Depth" O 0.112/0.115 x 0.100 90 to O 0.1320.003 (O 2.3 x "Depth" O 2.8/2.9 x 2.5 90 to O 3.40.08) dimensions in inches (mm) October 2008 / 250 3/4 www.sensortechnics.com X-Valve(R) 8 mm switching soleniod valves ORDERING INFORMATION Model no. Series Pressure Orifice Options X 1 2 5 6 p si 3 0 p si 1 0 0 p si 0.045" (1.143 mm) C oi l wattage Voltage Type 3 V DC (6 & 30 psi only) Electical connection S short pin L long pin Elastomer F FK M E EPD M (6 psi only) Optional accessories* B 0 screw & gasket no accessories 0.5 W universal 03* 1 W universal 1 W NC 05 12 24 0.030" (0.762 mm) 5 V DC (6 psi only) 0.020" (0.510 mm) 12 V D C 24 V D C S silicone (6 psi only) * accessory field not printed on valve Sample order no: X 1 05 L F B Note: Not all combinations might be available. Non-elastomeric versions with enhanced media compatibility are available on request. Please contact your nearest Sensortechnics sales representative for further information. Accessories (please order separately using the following order numbers) Order No. ZK071248 X-RETAINING CLIP X-PORT PLUG X-CONNECTOR Description Clear transparent polyurethane tubing, inner diameter 1/16 inch (1.6 mm), outer diameter: 1/8 inch (3.2 mm) Solder clip for mounting Port plug 12 " leads with connector Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. October 2008 / 250 4/4 www.sensortechnics.com |
Price & Availability of X124LE0
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |